The Sales of PILODYN had finished | TERRA-TECH,INC.
PILODYN distribution had finished.
Due to Swiss Proceq had finshed manufacturing
PILODYN Wood Tester,TERRA-TECH,Tokyo
finished distribution of PILODYN 6J / 6J Forest
on November 1,2009
PILODYN distribution had finished.
Due to Swiss Proceq had finshed manufacturing
PILODYN Wood Tester,TERRA-TECH,Tokyo
finished distribution of PILODYN 6J / 6J Forest
on November 1,2009
Laser Rangefinder/Hypsometer TruePulse
by Laser Technolgy
レーザー距離計測高計 トゥルーパルス のすべて
斜距離 水平距離 角度 測高計 距離計 樹高
使い方 価格 注文.
All that
TruPulse (R)
Laser Hypsometer
ليزرومتر هبس

TruPulse 200 KKR Tokyo 2008
Your reference page for
Distance and Height
Measurement
Feature:
Compact and lightweight, the TruPulseTM 200 features
"thru-the-lens" viewing so you know the laser energy is
traveling directly along your line of sight.
Because measurements are shown in the display,
you never have to take your eyes off the target!
Take distance measurements up to 1,000m away
without a reflective target.
Results are displayed in feet, yards, or meters.
An integrated tilt sensor allows you to measure horizontal
or vertical distance and calculate an object’s height instantly
by using the built-in two-shot routine.
Filter Mode : Forest Market Advantage.
It is hard to use laser rangfinder in thick bush
or fliage, due to bush reflects laser light.
This filter mode makes he laser only recognize
highly reflective material,which means it will
ignore surrounding obstructions such as thick
brush or foliage.
This eliminates the need to clear away a path
in order to have a clear line of site when
measuring the horizontal distance to the tree
for height measurements.
A special filter adaptor can be placed over the
receiving lens of the laser rangefinder to ensure
good penetration through the thick brush or foliage.
Carrying case, lens cloth, neck strap,
and manual included. Water and dust resistant

Diopter adjustment &
The eyepiece fulldown position
TruPulse Tokyo 2008

Diopter adjustment ring
and Eyepiece full down position
TruPulse Tokyo2008
The Eyepiece is designed for comfort
and to block exceessive outer light.
To extend the Eyepiece,turn the eyepiece
counter-clock wise while pulling up.
To return the eyepiece to its original position,
turn the eyepiece clockwise and push down.
the eyepiece may be located in any position
from fully up to fully down to match your
personal preference.
アイピースは外光をさえぎるもので
裸眼で見るときは、反時計方向に
回して手前に引っ張ります。
メガネを使用する場合は一杯
押し込んで使います。

0 diopter mark
TruPulse Tokyo 2008
0 ジオプトリマーク
The TruPulse’s diopter adjustment allows for
comfortable viewing even for eyeglass wearers.
An RS 232 serial port allows for data downloading.

4-9 PIN Cable for Data Transfer
TruPulse To PC(Option)

Porch

2 AA batteries
Battery Compartment Cover
■特 長
商品名TruPulseの由来は "Thru-the-lens"
(スルーザレンズすなわちレーザー光線はスコープと
同じレンズを通して視準線上で発射されるところから
スルーにかけてトゥルーパルスと命名されました。
パララックス(視差)がなく精度が向上します。
測定距離: 反射板なしで1000m
反射板使用で 2000m
高精度: 距離100m以上で±30cm
小型:ポケットに入る手のひらサイズ
軽量:わずか220g
データ通信:確実なRS232Cシリアル接続で
データの受け渡し可能
森林計測に朗報:フィルターモード
枝や葉に当たるレザー光線の反射により
密生した植生内でレーザー機器を使うことは
これまでは非常に困難でした。
TruPulseのフィルターモードではブッシュ内の
目標に反射板を置き受光レンズにフィルターを
取り付けて枝や葉で反射した光は検知せず、
反射板で跳ね返ったレーザー光線だけを
選択的に計測します。
フィルター・反射板(別売品)
耐水・耐塵講造で過酷な現場で活躍
使用温度範囲が広い
7倍望遠鏡 手ぶれのない使いやすい倍率
スコープ内LCD 内にフィート・ヤード・メーター・
角度単位 が一括表示されます。
3脚・1脚取付ネジ孔:精密測定に三脚や一脚が使えます。


2005年から米国LTI社製レーザー距離計・測高計
TruPulse トゥルーパルス測高計を販売しています。
コンパクト軽量で精度が比較的高くプロの道具として
さまざまな分野で活躍しています。
各部名称

Front View TruPulse200

Top View TruPulse200

Left Side View TruPulse200

Rear side View TruPulse200

Right side View TruPulse200

Bottom side View TruPulse200
Q&A よくある質問と答え
FAQ IML Resistograph No.2-80928V
.jpg)
Instrumenta Mechanik und Labor GmbH
.jpg)
TERRA-TECH,INC. Tokyo Japan
Authorized Distributor of IML Products for Japsan

F-300S in operation Tokyo Japan

F-300SE ElectronicUnit Version

Elctronic unit

Software F-TOOLS pro
Frequent Questions abnd Answers
Resistograph F-series
Q & A Drill Needle
.jpg)
Q-1 : How many times can I use the Drill Needle ?
A-1: It depeds on the object wood or trees are hard or soft.
you can use the drill needle around 50 -100 times.
Q-2: What is the best indication when to change a drilling needle?
A-2: When the edge on the drill bit tip form a radius and look dull.
Q & A Battery
.jpg)
.jpg)
Bosch 12V 2.4Ah Battery Bosch Battery Charger
Q-3: Does it damage the battery of registograph, if I rechage it frequently?
A-3: No It doesn’t !
Q-4: Do I have to recharge the battery, even if I do not use the registograph
over long period?
A-4: You might. it depends on how you long wait.
we recommend you to recharge after 2-3 weeks of no use.
IML Tree Decay Detector
Resistograph
Детектор спада вала
Detetor da deterioração da árvore
結構樹朽爛探測器
IML 樹木診断機器

F-300S

F-300SE
レジストグラフとは
The resistograph is an instrument that detects
decay and cavities in trees and timber.
The resistograph is an ideal device for
estimating tree stability and longevity.
As the micro drill enters the tree, the resistance
of the wood changes the rotation speed of the drill.
Applications:
- living trees
- dead stems
- roof beams
- bridge timbers
- wooden framed houses
- root, trunk and climbing inspections
- tree growth diameter,tree ring analysis
- termite and pest control
- utility poles
- building inspection
- timber bridge inspection
- playground inspection.
Its advantage is that it detects decay with virtually
no tree damage. It also enables you to analyze
annual ring structures and to determine the growth
tendency according to the width of annual rings.
The Resistograph functions by driving a microdrill
(3.0 mm tip, 1.5mm shaft) into the timber at constant
speed using a Bosch drill attachment.
The wood will only be insignificantly injured, and
the drilling hole closes itself due to a special
drilling angle that was customized for the drill bit.
A special computer program (F-Tools, E-Tools, B-Tools,
and T-Tools - see Electronic Unit) is available for all
instruments.
Three instruments are available that offer drilling
depths of 300, 400 and 500mm respectively.
Advantages of the Resistograph:
* Fast, accurate and reliable
* Find wood decay, rot, hollow areas and cracks
* Analyze annual ring structures
* Determine growth tendency according to the width
of annual rings
* High efficiency due to less work having to be done
* Unneccessary wood damages are prevented
■Specifications
Drilling depth: 150 / 300 / 400 / 500 mm
Drive unit: BOSCH Accumulator drill GSR 12V
Resolution : 0,1 mm
Feed speed : 0-55 cm/ min
Weight: approx. 3,0 - 3,2 kg
Battery charger: 220V/ 110V
Batteries: 12V 1,5/ 2,0/ 2,4 AhNiCd
Electronic unit
Optional: - Serial electronic unit
IML-Software: F-TOOLS / F-TOOLS PRO
Serial electronic unit
IML Software Center F-TOOLS / F-TOOLS PRO
SOFTWARE
◆ F-TOOLS
The standard software F-TOOLS allows you to configure
the electronics as well as to transfer the memorized
measurement data to your PC. There are different views
to show the measurements.
The data can then be evaluated and printed.
System requirements
- IBM compatible PC with 486SX/25 MHz or better
- 8 MB RAM or higher (16 MB recommended)
- 2 MB of available hard disk space
- VGA video adapter
- 32-Bit operating system, Windows 95, 98,
2000 or XP / NT 4.0.

F-TOOLS
◆ F-TOOLS PRO
Software-Packages (optional)
Expanded Functions (F-TOOLS PRO)
includes 2 packages as follows
○ Package 1 Export, average, print-out
- export of the measurement data to the ASCII or EMF format
- arithmetical average of the measurement graph (growth rate)
- printing all the open measurement graphs
- general printing (up to 10 graphs per page)
○ Package 2 Cavity detector
This package enables the electronic unit to indicate
you the total length of all located cavities can be
shown in a graph. Also the parameters of the cavity
detector can be configured.
○ Package 3 Annual ring analysis
With the help of this package the annual rings can
be marked out and be measured directly in the
measurement graph. The data are exported to ASCII
or MST format. The ASCII data can be processed by
other programs. The MST data can be imported and
processed by the IML software T-TOOLS / T-TOOLS PRO.
.jpg)
F-TOOLS Pro
ドリル貫入抵抗式準非破壊樹木腐朽診断機
レジストグラフResistograph の特長
ドイツIML社製の樹木診断機器で、最大直径3mmのドリルを
一定の速度で樹体内に貫入させ、ドリルにかかる抵抗を
連続測定し、内部の硬度(腐朽・空洞 年輪)を波形グラフ
で印刷したりデータをパソコンに転送します。
一直線上の硬さの度合と変化が即時判明します。
非破壊ではありませんが現場で簡単に腐朽の実態が
把握できる便利なツールです。
◆樹木診断機器レジストグラフResistographの用途
Applications of Resistograph
● 樹木腐朽診断 Tree Inspection
● 木製遊具診断 Playground Inspection
● シロアリ検査 Termite Inspection
● 住宅劣化診断 Building Inspection
● 木橋診断 Timber Bridge Inspection
● 年輪研究 Tree Ring Analysis


F-300S in Case

F-300SE Electronic unit
F-300S 硬材用ドリル長さ284mm
■主仕様 Specifications:
貫入深さ Drilling Depth: 28.4cm
進入速度 Advanced Speed: 0-55cm/min
分解能 Resolution: 0.1 mm
重 量 Weight: 3.15 kg
パッケージ構成内容:Bosh Drill, Charger,
2 Batteries, Accessories Pack
(400 Wax Papers, 5 Drill Bits),
Tool Kit 、Paper Tray, Case,
Adapter Connection Cable
ドイツボッシュドリル、充電器、充電池2個、
アクセサリーキット
(ワックスペーパー400枚、予備ドリル5本)
工具キット、 ペーパートレイ、アルミ、
自動車バッテリー 接続ケーブル
収納ケース、


F-400S Package in case

F-400SE Package in case
F-400S 硬材用ドリル長さ386mm
■主仕様 Specifications:
貫入深さ Drilling Depth: 38.6cm
進入速度 Advanced Speed: 0-55cm/min
分解能 Resolution: 0.1 mm
重 量 Weight: 3.6kg
パッケージ構成内容:Bosh Drill, Charger,2 Batteries,
Accessories Pack(400 Wax Papers, 5 Drill Bits),Tool Kit
Paper Tray, Case, Adapter Connection Cable
ドイツボッシュドリル、充電器、充電池2個、アクセサリーキット
(ワックスペーパー400枚、予備ドリル5本)工具キット、
ペーパートレイ
アルミ、収納ケース、自動車バッテリー接続ケーブル


F-500SE Package in case
F-500S 硬材用ドリル長さ488mm
■主仕様 Specifications:
貫入深さ Drilling Depth: 48.8cm
進入速度 Advanced Speed: 0-55cm/min
分解能 Resolution: 0.1 mm
重 量 Weight: 4.0 kg
パッケージ構成内容:Bosh Drill, Charger,2 Batteries,
Accessories Pack(400 WaxPapers, 5 Drill Bits),Tool Kit
Paper Tray, Case, Adapter Connection Cable
ドイツボッシュドリル、充電器、充電池2個、アクセサリーキット
(ワックスペーパー400枚、予備ドリル5本)工具キット、
ペーパー
トレイ、アルミ、収納ケース、自動車バッテリー接続ケーブル

電子装置 Electronic unit データエクスポート機能

Drill Needle キリ形状
先端部 3 mm 軸直径 1.5 mm
切削屑は穴内部に残り穴は閉じますが
材にわずかな損傷があります。
キリ表面硬化処理済
先端部強化処理

Wax Paper

Bosch Battery 12V 1.5Ah

Bosch Battery Chager 110VAC-12VDC

Tool Kit