Blume Leiss Altimeter
Repair Service 修理受付 Tree Height Measurement, Hypsometer, Analog Instrnment
Made in Germany, Berlin ブルーメライス 測高器 樹高測定
Altimeter Blume Leiss
BL-6

BL-6 left side

BL-6 in operation

BL-6 set component
◆Features
- light and rugged
- simlply designed
- easy to use
- rangefinder inclusive, no tape
- high accuracy less than +/-1 %
Application
Surveying
Forestry
Architecturre
Antenna installation
Power line construction
Agriculture
Mining etc.
◆How to use BL-6
-Fix the folded Target Staff on the tree trunk
with screwed pin
-Select a distance, preferably
15, 20, 30, or 40 meters
away from the object, where the
required point on the object
(e.g. object tip) can be seen.
-Measure the selected horizontal distance
from the base of the object.
.jpg)
Distance Staff on the
Tree trunk with Pin
A: you select horizontal base distance from 4 kinds
15 m, 20 m, 30m, and 40 m
B: Example In case of using 15 m
you look through the target via Rangefinder.

Baseline Measure Adjustment
real and Virtual Imagees

C: Looking through the Rangefinder. you move forward
and backward and stop the pint where you look the real
scale and virtual image of scale in line 0 and 15.
The point distance is 15 m away from the Target.

Upper/Lower release button
.jpg)
Aim toward upper point of target and push (release)
upper button and apart finger from button,
pendulm indicater stop and indicates
Upper height h1 on the scale

Aim lower(bottom) point of target
and push and release lower button
indicated lower height h2 on the scale.

BL-6 Pendulum & Scales
15 m top scale indicate
h1= 12.50 h2= 1.50 m
H = h1 + h2 = 12.50+1.50 = 14.0 m
◆Specifications
Dimensions 140 (W) X 130(L) X 21(H)mm
Weight (Unit) 260 g
Weight ( Scale ) 310 g
Total Weight inc.c.case 740 g
Accuracy ( altitude) ±0.20 m
Base Distance 15m , 20m, 30m ,40m
Attachment Baseline measure plate, Pin Case, manual
>> For more information
>>> Repair Service Availble
mail to
Minoru INOUE
TERRA-TECH,INC. Tokyo Japan
info ATMARK ttij.com